Case studies
Four parts, four questions, with every number shown. Each study was done with the same tools that run your check. Projects with industrial clients are on the founder's site.
Gripper finger: six positions on the build plate
The same PA6-CF gripper finger in six positions on the build plate: support from 4.3 to 32.6 cm³, height from 40 to 90 mm. The numbers and how to choose.
SLS: same build, more uniform cross-section
200 parts in one SLS build with the same height and packing density: a different arrangement along the height cut the spread of sintered area from 53 % to 25 %.
SLA: resin drain holes, added automatically
A resin housing with a closed interior traps 138 g of resin. Two Ø3.5 mm holes placed by the tool left no closed cavity and a mesh ready for preparation.
Continuous fiber against carbon fiber filled
The same gripper finger in three versions: filled filament, continuous fiber in all layers and only in the outer layers. Deflection 0.305, 0.112 and 0.185 mm.